Most asphalt driveways in Toronto and the GTA cost between $3.50 and $7.00 per square foot in 2026, depending on location and the complexity of the job. That is the range our residential quotes come from. Driveways under 920 square feet have a minimum charge of $3,200. Where your driveway lands in that range depends on a handful of things you can often spot yourself before anyone visits.
How much does it cost to pave a driveway in Ontario?
In the GTA, a new asphalt driveway from us costs $3.50 to $7.00 per square foot in 2026, depending on location and the complexity of the job, with a $3,200 minimum for driveways under 920 square feet. These are our prices for Vaughan, Toronto, York Region and Peel, where we work. As a worked example, a double driveway of 800 to 1,000 square feet comes to between $3,200 and $7,000 on those figures. Your free written estimate gives the exact number once the driveway is measured.
How much does it cost to pave a 20x20 driveway?
A 20 by 20 foot driveway is 400 square feet. At our 2026 range that would work out to $1,400 to $2,800, but it is under 920 square feet, so our $3,200 minimum applies. As a worked example, then, a 20x20 driveway is priced at $3,200. The minimum covers what every job needs whatever its size: the crew, the equipment, the trucks and the excavation and base work.
What the low and high ends look like
The low end of the range fits a simple, open, rectangular driveway with good truck access, a base that only needs light work, and straightforward edges. The high end fits a driveway that needs a deep excavation, a lot of new stone, hand work around steps and gardens, or drainage fixes.
Most driveways have a mix of easy and hard features, so most quotes land somewhere in the middle. A site visit and a measurement settle where yours sits.
What moves a driveway within the range
Size
Square footage is the biggest single factor. Large driveways cost more in total but often less per square foot, because the fixed costs of bringing a crew and equipment to your street are spread over more area.
Removal and disposal
Old asphalt has to be broken out, loaded and hauled away. A thin, worn layer comes out quickly. A driveway that has been paved over two or three times is thicker, heavier and slower to remove, and there is more material to dispose of.
Base condition and depth
This is where quotes differ most. If the existing stone base is firm and drains well, it may only need to be topped up, regraded and compacted. If it is soft, wet or thin, it has to be dug out and replaced, which means more excavation, more trucking and more Granular A. Soft spots are most likely where water has been collecting for years: below downspouts at the garage end, and over old utility trenches near the street. Ask every contractor to state the base depth in writing. It is the line that explains most of the gap between quotes.
Access
A dump truck and paver that can back straight up the driveway make for a fast job. A narrow side lot, a long run from the street, overhead wires, low trees or a shared driveway slow everything down and can mean smaller equipment or more trips.
Shape and hand work
Straight edges and open rectangles are quick to pave with machines. Curves, flared aprons, walkways, steps, garden beds, posts and tight corners around the house all need hand raking and hand compaction, which takes more time per square foot.
Drainage
If water pools at the garage door or runs toward the house, fixing it may mean regrading the base, changing the slope, or adding work at the edges so water can get away. That work is cheaper to do during a replacement than afterwards, but it adds to the price.
Widening
Making a driveway wider adds square footage, and the new area has no base at all, so it needs full excavation and a new stone base. Because we repave the whole driveway on almost every widening, the price covers the existing area as well as the new one. See driveway widening and extensions for how that works.
Worked examples
These are examples only, not quotes. They are straight arithmetic on our 2026 range of $3.50 to $7.00 per square foot, with our $3,200 minimum applied to driveways under 920 square feet. Your price depends on the factors above and is set once the driveway has been measured and inspected.
| Example size | Rough shape (example) | Range (min to max) |
|---|---|---|
| 400 sq ft | 10 ft × 40 ft, single car | $3,200 (minimum charge) |
| 600 sq ft | 15 ft × 40 ft, wide single | $3,200 to $4,200 |
| 900 sq ft | 20 ft × 45 ft, double | $3,200 to $6,300 |
| 1,200 sq ft | 24 ft × 50 ft, double and long | $4,200 to $8,400 |
To estimate your own driveway, measure its length and width in feet, multiply them, and multiply the result by $3.50 and by $7.00. If your driveway is under 920 square feet, the $3,200 minimum applies to any figure below it. For an L-shape or a flared apron, split it into rectangles and add them up. That gives you a fair window, not a price.
What a good written quote should list
A quote you can compare should tell you exactly what you are paying for. Look for:
- The area being paved, in square feet or square metres, and a sketch or description of the edges.
- What is being removed and how it is disposed of.
- Excavation depth and how soft spots will be handled if they are found.
- Base material and compacted depth, for example Granular A at a stated thickness.
- Asphalt mix and compacted thickness, for example an HL3 surface course.
- Drainage and grading work, including the slope away from the garage and house.
- Transitions to the garage floor, the sidewalk, the road and any walkways.
- Clean-up and restoration of edges and lawn.
- Tax, stated clearly as included or extra.
- Who is doing the work and their insurance. We carry $7 million in liability insurance. More on our insurance page.
Be wary of a quote that gives only a total, or a price that seems far below the range. A missing base is the most common reason a cheap driveway fails early.
When a cheaper option fits
Not every tired driveway needs replacing. If the base is sound and the damage is limited, two lower-cost options may do the job:
- Asphalt repair: patching potholes and damaged areas, and hot rubber crack filling to keep water out of the base.
- Asphalt resurfacing: a new layer of asphalt over a solid old one, or milling off the top and repaving.
There are no published prices for repair or resurfacing because they depend so much on the extent of the damage. Both only pay off over a sound base. If the base has failed, a fix that cracks again next spring can end up costing more than a replacement would have.
Getting a price for your driveway
Run the measure-and-multiply sum above first, or let the cost calculator do it, so you know roughly where you stand. Then send the address, your rough square footage and photos of the garage end, the street end and any spot where water sits through our contact page. The free written estimate covers every line in the checklist above, which makes it easy to hold other quotes against. Our office is in Vaughan, and we work across Toronto, York Region and Peel.
